AEG 7040 TWF, Руководство пользователя

Страница: 51 / 56

Setting Implementation
Water hardness
1) 1. Turn the programme selector to any programme.
2. Press simultaneously the EXTRA DELICATE (EXTRA SANFT) (1) and TIME
(ZEITWAHL) (5) buttons and hold down for approx. 5 seconds. The current
setting is on the display:
–
low conductivity <300 μ S/cm
–
medium conductivity 300-600 μ S/cm
–
high conductivity >600 μ S/cm
3. Press the START PAUSE button (6) sequentially until you set desired level.
4. To memorize setting press simultaneously the EXTRA DELICATE (EXTRA
SANFT) (1) and TIME (ZEITWAHL) (5) buttons or turn knob to OFF (AUS)
position
Emptying water
reservoir
-
warning off
2)
1. Turn the programme selector to any programme.
2. Press simultaneously the INTENSIVE (TROCKNEN PLUS) (2) and TIME
(ZEITWAHL) (5) buttons and hold down for approx. 5 seconds.
The current setting is on the display:
– warning icon and
- warning message is off
– warning icon and
- warning message is switched on
1) Water contains, a variable quantity of limestone and mineral salts of which quantities vary according to
geographical locations thus varying its conductivity values. Relevant variations of the conductivity of the water
compared to those prefixed by the factory could slightly influence the residual humidity of the laundry at the
end of the cycle. Your dryer allows you to regulate the sensitivity of the drying sensor based on conductivity
values of the water.
2) By default the warning LED is always on at the end of the drying cycle or during the cycle if the water reservoir
is full. When using an external drain for the condensed water warning can be offi
TECHNICAL SPECIFICATIONS
Height x width x depth 85 x 60 x 58 cm
Drum volume 108 l
Depth with loading door open 109 cm
Height can be adjusted by 1.5 cm
Weight when empty approx. 52 kg
Loading volume (depends on programme)
1)
max.
7
kg
Voltage 220-230 V
Necessary fuse 6 A
Total power 1050 W
Energy efficiency class
A
Energy consumption (7 kg of cotton, pre-
drained at 1000 rpm)
2)
1.85
kWh
Technical specifications 51