background image

6

Overheated fats and oils catch fire quickly. You should supervise 
cooking when preparing foods in fat or oil (e.g. chips).

Switch off the cooking zones after use.

Safety When Cleaning

For safety reasons do not clean the appliance with a steam jet or high 
pressure cleaner.

Clean the hob in accordance with the maintenance and cleaning in-
structions in this manual.

To Avoid Damaging Your Appliance

Do not use the hob as a work surface or for storage.

Do not operate the cooking zones when there is no pan or the pans 
are empty.

Ceramic glass is insensitve to temperature shock and very robust; 
however it is not unbreakable. Especially sharp and hard objects that 
fall on the cooking surface can damage it.

Do not use cast iron pans or pans with a rough, burred or damaged 
base. Scratching may occur if the pans are slid across the surface.

Do not place any pans on the hob frame. Scratching and damage to 
the paint may occur.

Make sure that no acidic liquids, e.g. vinegar, lemon or descaling 
agents, are spilt onto the hob frame, since these cause dull spots.

If sugar or a preparation with sugar comes into contact with the hot 
cooking zone and melts there it must be cleaned off immediately 
with a scraper while it is still hot. If it cools, the surface may be dam-
aged when it is removed.

Keep all items and materials that can melt away from the ceramic 
glass surface, e.g. plastics, aluminium foil, or oven foils. If something 
of this nature should melt onto the ceramic glass surface, it must also 
be removed immediately using the scraper.

Содержание 6630 K-MN









































Отзывы: