background image

To override the function for only one
cooking time:

 activate the hob with  .

 comes on. Touch   for 4 seconds. 

Set the heat setting in 10 seconds.

 You

can operate the hob. When you
deactivate the hob with   the function

operates again.

5.10 

OffSound Control

(Deactivating and activating

the sounds)

Deactivate the hob. Touch   for 3

seconds. The display comes on and goes
out. Touch   for 3 seconds.   or 
comes on. Touch   of the timer to

choose one of the following:

 - the sounds are off

 - the sounds are on

To confirm your selection wait until the

hob deactivates automatically.

When the function is set to   you can

hear the sounds only when:
• you touch 

• Minute Minder comes down

• Count Down Timer comes down

• you put something on the control

panel.

5.11 

Power management

• Cooking zones are grouped

according to the location and number

of the phases in the hob. See the

illustration.

• Each phase has a maximum electricity

loading of 3700 W.

• The function divides the power

between cooking zones connected to

the same phase.

• The function activates when the total

electricity loading of the cooking

zones connected to a single phase

exceeds 3700 W.

• The function decreases the power to

the other cooking zones connected to

the same phase.

• The heat setting display of the

reduced zones alternates between

the chosen heat setting and the

reduced heat setting. After some time

the heat setting display of the

reduced zones stays on the reduced

heat setting.

5.12 

Hob²Hood

It is an advanced automatic function

which connects the hob to a special

hood. Both the hob and the hood have

an infrared signal communicator. Speed

of the fan is defined automatically on

basis of mode setting and temperature

of the hottest cookware on the hob. You

can also operate the fan from the hob

manually.

For most of the hoods the

remote system is originally

deactivated. Activate it

before you use the function.

For more information refer

to hood user manual.

Operating the function automatically

To operate the function automatically set

the automatic mode to H1 – H6. The hob

is originally set to H5. The hood reacts

whenever you operate the hob. The hob

recognizes temperature of the cookware

automatically and adjusts the speed of

the fan.

Automatic modes

 

Auto-
matic
light

Boiling

1)

Frying

2)

Mode H0 Off

Off

Off

Mode H1 On

Off

Off

Mode
H2 

3)

On

Fan
speed 1

Fan
speed 1

www.aeg.com

12

Содержание 61 B4A 00 AA





















Отзывы: