AEG 49669GO-MN Скачать руководство пользователя

Страница: 30 / 38

INstAllAtIoN of tHE ApplIANcE (coNtINUED)

slot-in installation (continued)

Installation of anti-tilt brackets and stops

• The brackets are to be secured to the back wall

with appropriate fasteners .

• The bottom edge of the the brackets rest on

the horizontal support surface .

• Two stops are to be screwed to the plinth in

locations as shown (stops provided) . the stops

locate into slots in the base of the appliance to

prevent the product from being pulled forward

when installed .

• Measurements from the rear wall are to be

adjusted if there are tiles etc . that come

between the appliance and the wall .

183mm

414mm

475mm

location of holes for front stops

Measurements are to be adjusted to account for the thickness of any skirting
board or tiles coming between the back of the appliance and the wall

front stops

Installation sequence for freestanding

or slot in installation

• Check that the required services are correctly

positioned (see electrical & gas services

requirements) .

• Ensure cabinetry has the correct details.
• Install anti-tilt brackets and chain hook or front

stops as appropriate .

• Remove all packaging from cooker, remove

all loose parts ie . trivets, burner crowns,

oven shelves .

• Remove plastic film from cooker.
• Fit splash back to cooker.

• Slide cooker into position to check fitment to

anti-tilt bracket . for freestanding installation,

check the height and level of the cooker . adjust

cooker feet as required .

•  Connect gas and electrical services.
•  Place into position.
•  Complete Certificate of Compliance.
•   Once services are connected, product can

be lifted onto the plinth and pushed back

carefully, ensuring the appliance engages into

both brackets at the rear and the front stops .

• If the product requires removal for service, it

must be lifted at the front approximately 5mm

to clear the front stops prior to being

pulled forward .

Содержание 49669GO-MN







































Результаты поиска

Содержание 49669GO-MN

Отзывы:

Похожие инструкции для 49669GO-MN

Бренды по названию

Популярные бренды

AEG 49669GO-MN, Руководство пользователя

Результаты поиска

Содержание 49669GO-MN

Отзывы:

Похожие инструкции для 49669GO-MN

Бренды по названию

Популярные бренды