background image

Denominations

W

9

Heating element Ø mm 145 radiant and halogen

1200

Heating element Ø mm 180 radiant 

1700

Heating element Ø mm 180 halogen

1800

TYPE AND SECTION OF THE POWER CABLES 4 HEATING ELEMENTS

3 X 2.5 mm

2

POWER OF ELECTRICAL COMPONENTS DENOMINATIONS W

MAINTENANCE

Before doing any repairs, disconnect the
appliance from the input power.

6) COMPONENTS SUBSTITUTION 

To replace the components lodged in the internal
part, is necessary to remove the appliance from the
furniture, overturn it, loosen the screws and take off
the bottom.
After these actions it is possible to work on the
plates, commutators, clamps and input cable.

In case of substitution of the input cable, the
installer must keep the “earth” conductor longer
than “live” ones, and must respect the cautions in
paragraph “electrical connection”.

To reassemble the appliance repeat the process
inversely.

7) TECHNICAL CHARACTERISTICS

OF THE ELECTRICAL COMPONENTS

To facilitate the job of the installer we present a
scheme with the characteristics of the components.

Cable type

Single phase power

230 - 240 V~

Rubber

H05 RR-F

TYPE AND SECTION OF THE POWER CABLES 2 HEATING ELEMENTS

3 X 1.5 mm

2

Cable type

Rubber

H05 RR-F

Single phase power 230 - 240 V~

Содержание 31050K













Отзывы: