AEG 1010V-W, Инструкция

Страница: 11 / 28

The ceramic hob
11
Cleaning the ceramic hob
Use the scraper supplied to remove spillages immedi-
ately, while the hob is still hot, especially sugar and
foods with a high sugar content (e.g. jam), melted plas-
tics and foil, all of which can damage the hob if left.
IF THE HOB IS VERY SOILED
:
1
Remove soilage using the razor blade scraper (see
below).
2
Use a hob cleaner product when the hot-hob warning
lights have all gone out. Shake the bottle and apply a
small quantity of cleaner directly onto the hob. Rub
clean using a damp cloth or paper towels.
3
Use a damp cloth to remove all remaining traces of the
cleaner, which could otherwise burn on when the hob is
next used. Wipe the hob dry.
Razor blade scraper
T
HE RAZOR BLADE SCRAPER SHOULD BE KEPT WELL OUT
OF THE REACH OF CHILDREN
. Use the razor blade
scraper carefully, as the razor blade is extremely sharp.
Use the scraper to remove spillages from the ceramic
hob.
HOW TO USE THE RAZOR BLADE SCRAPER
:
1
Pull back the protective cover until the blade is visi-
ble
(
SEE ILLUSTRATION
)
.
2
Make sure that the razor blade is clean and not
worn. There is a risk, otherwise, that it might
damage the hob. New razor blades can be bought
from drugstores.
3
Angle the scraper at approx. 45° and scrap away
the spillage. The razor blade can be pressed
down hard onto the hob without causing any
damage.
4
Carefully clean the blade by wiping it with
kitchen roll paper.
5
When you have finished, press the protective
cover forwards as far as it will go. Keep the
scraper out of the reach of children.
CHANGING THE RAZOR BLADE
:
1
Open the scraper by completely unscrewing the screw
(no screwdriver needed) and then place the new razor
blade at the front edge.
2
Put the scraper together again and screw the
screw back into place.
3
Press the protective cover forwards as far as it
will go to cover the razor -blade.