AEG Powertools PS 254 SB, Оригинальное руководство пользователя

Страница: 26 / 32

20
EN
English
should be connected via a residual current device (FI, RCD, PRCD) of
30mA or less.
Before doing any work on the machine, pull the plug out of the
socket.
Keep mains lead clear from working range of the machine. Always
lead the cable away behind you.
Before use check machine, cable, and plug for any damages or
material fatigue. Repairs should only be carried out by authorised
Service Agents.
WARNING!
Read all safety warnings and all instructions.
Failure to follow
or serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS
Wear ear protectors. Exposure to noise can cause hearing loss.
Always wear goggles when using the machine. It is recommended
to wear gloves, sturdy non slipping shoes and apron.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust thoroughly,
e.g. with a vacuum cleaner.
TECHNICAL DATA
Mitresaw *
PS 254 SB
Rated input 220-240 V, 50 HZ, S6(40%),
2000 W, 8.3 A
No-load speed 4,500 min
-1
Saw blade dia. x hole dia 254 x 30 mm
Saw blade thickness 1.8 mm
Max. cutting capacity
Mitre 0°/ Bevel 0°
Mitre 45°/ Bevel 0°
Mitre 0°/ Bevel 45°
Mitre 45°/ Bevel 45°
90 x 305 mm
90 x 215 mm
50 x 305 mm
50x 215 mm
Min. workpiece dimensions 130 x 35 x 2.5 mm
Weight according EPTA-Procedure 01/2003 19.5 kg
Noise/Vibration Information
Measured values determined according to EN 61029. Typically, the A-weighted
noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
97.3 dB (A)
110.3 dB (A)
Total vibration values (vector sum in the three axes) determined according to
EN 61029.
Vibration emission value a
h
Sawing of wood
Uncertainty K=
2.4 m/s
2
1.5 m/s
2
*PS
=
^
Mitresaw
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 61029
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
the total working period.
keep the hands warm, organisation of work patterns.