AEG Electrolux SANTO 75598-1, Руководство пользователя

Страница: 13 / 80

13
• When the temperature is being adjusted a flashing display indicates the
fridge temperature currently set (DESIRED temperature).
Starting Up - Setting the Temperature
1. Plug the mains plug into the mains socket.
2. Press ON/OFF, button B can function the wine cooler compartment separa-
tely with the appliance in function. The green mains pilot indicator illumi-
nates.
3. Press either the “C“ (+) or “E“ (-) button. The temperature display switches
over and the DESIRED temperature currently set flashes on the temperatu-
re display.
4. Set the required temperature by pressing the “C“ (+) or “E“ (-) buttons (see
section "Temperature setting buttons"). The temperature display will imme-
diately show the changed setting. Each time the button is pressed the tem-
perature is adjusted by 1 °C.
From a food safety point of view +5 °C should be considered sufficiently
cold for storing food in the fridge.
5. Once the required temperature has been set, after a short period (approx. 5
sec.) the temperature display will change and again indicate the current
ACTUAL temperature inside the fridge. The display will change from flashing
to continuous illumination.
Information! When the setting is changed, the compressor does not start
immediately if automatic defrosting is currently taking place. As the stora-
ge temperature within the fridge is reached quickly you can store food
immediately after switching on.
Important: If the wine cooler compartment is off, the door must be clo-
sed in order that the freezer is working properly.
In this condition, the electronic control of the appliance functions auto-
matically and periodically circulating the air to prevent unpleasant smel-
ls and humidity.
Switching the appliance off
The wine cooler can be switched off independently of the freezer compart-
ment. By switching off the freezer compartment you also switch off the
wine cooler. To switch off the wine cooler, hold down the On/Off button (B)
for the wine cooler for a count of 5 Sec.
To switch off the appliance hold down the On/Off button (G) for approx.5
seconds. This will result in acount down from "3" to "1" taking place in the
temperature display. On reaching "1" the appliance will switch off. The tem-
perature display will go off.
Ofrecido por www.electromanuales.com