67
At the end of the programme
The machine stops automatically. A static zero appears on the display.
The END light comes on in the programme progress display.
If the RINSE HOLD option has been selected, the START/PAUSE button
goes off, the pilot light END on the programme progress display illumi-
nates, the light PUERTA is red and the display shows a static zero to
indicate that the water must be emptied out.
To empty out water there are two possibilities:
• Select programme DESAGUAR (draining) and then depress the
START/PAUSE button:
The water is emptied out without spinning.
• Select programme CENTRIFUGAR (spin). Select the spin speed by means
of the relevant button and then depress the START/PAUSE button. The
water is emptied out and the laundry is spun at the selected spin speed.
Warning!
The programme selector dial must be turned first to RESET
O/OFF
and then to DESAGUAR or CENTRIFUGAR programme.
Turn the selector dial to
O/OFF
to switch the machine off.
Remove the laundry from the drum.
Check that the drum is empty so as to avoid any forgotten items
being damaged in a subsequent wash (e.g. shrinking) or their colour
running into a load of whites.
Close the water tap.
Leave the door open to prevent the formation of mildew and unpleas-
ant smells.
How to wash
132981740_gb.qxd 16/05/2006 15.09 Pagina 67