AEG Electrolux LAVAMAT 86950 A Скачать руководство пользователя страница 14

cycle is very noiseless and it can be selected at night or in times with a more economical

power rate. On some programmes the rinses will be performed with more water.

To empty out the water, please read «At the end of the programme» section in this

chapter.

For the compatibility between options and washing programmes consult the chapter

«Washing programmes».

Programme options (button 4)

Depending on the programme, different functions can be combined.
Not all the options are compatible between themselves. The symbols and messages of the

incompatible options are not displayed.

Anyway, if an option, which is not compatible with the set washing programme or any

other option, is selected, the display says that is not selectable.

You must select the options after you have selected the programme but before pressing

the button 

7

 . Press the button 

4

 to activate the option menu.

To scroll all the available options, press the button 

4

 . The corresponding programme name

appears in the relative rectangle to indicate that this programme can be selected.

Press the button 

4

 to activate and confirm your choice. The corresponding symbol appears

on the right side of the display to indicate that this option has been set. Press the same

button to deactivate the option.

After selecting the options, wait about 10 seconds until the display gets back to the default

status. The selected options appear on the display.
For the compatibility between this option and washing programmes consult the chapter

«Washing programmes».

PREWASH

Select this option if you wish your laundry to be prewashed at 30°C before the main wash.

The prewash phase ends with a short spin in programmes for cotton and synthetic fabrics,

whereas in the programmes for delicate fabrics the water is only drained.

The relevant symbol will appear on the display.

This option is recommended for heavily soiled laundry.

STAIN

Select this option to treat heavily soiled or stained laundry with stain remover (extended

main wash with time optimized stain action phase). The relevant symbol will appear on the

display.

This option 

is not

 available with a temperature lower than 40°C.

If you wish to perform a programme with the stain option, pour stain remover into stain

compartment   .

SENSITIVE

By selecting this option the washing intensity will be reduced. The machine adds one rinse

in the programmes for cottons and synthetics. The relevant symbol will appear on the

display.

This option cannot be selected together with Extra Rinse option.

14

Daily use

Содержание LAVAMAT 86950 A









































Отзывы: