manualshive.com logo in svg

AEG Electrolux LAVAMAT 64819, Информация пользователя

Поделиться
Скачать
AEG Electrolux LAVAMAT 64819 Скачать руководство пользователя страница 16

16

End of the wash cycle/removing the washing

At the end of the programme, END lights up on the programme 
progress display. The door can be opened as soon as the DOOR indicator 
is lit green.

1.

Open the loading door and remove the washing.

2.

Turn the programme knob to OFF.

3.

Close the water valve.

4.

After washing, pull out the detergent drawer a little to enable it to dry 
out. Keep the loading door very slightly open so that the washing ma-
chine can air.

If RINSE HOLD has been selected: 

After the rinse hold, END lights up on the programme progress display.
The water must first be drained:

–

Either turn the programme knob to OFF, then to DRAIN and press the 
START/PAUSE button (the water is drained without spinning),

–

or turn the programme knob to OFF and then to SPIN. Change the 
spin speed if necessary and press the START/PAUSE button (the water 
is drained and the washing spun).

Содержание LAVAMAT 64819













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды