AEG Electrolux LAVAMAT 62825, Информация пользователя

Страница: 32 / 40

32
Water inlet
Attention!
•
An inlet hose is supplied and can be found inside the machine drum.
•
Do not use the hose from your previous machine to connect to
the water supply.
•
This appliance must be connected to a cold water supply.
1. Open the porthole and extract the inlet hose.
2. Connect the hose with the angled
connection to the machine.
Important!
Do not place the inlet hose down-
wards. Angle the hose to the left
or right depending on the position
of your water tap.
3. Set the hose correctly by loosening
the ring nut. After positioning the
inlet hose, be sure to tighten the
ring nut again to prevent leaks.
4. Connect the hose to a tap with a
3/4” thread.
Always use the hose supplied with
the appliance.