Cancelling a programme
Turn the selector dial to
O
to cancel a programme which is running. Now you
can select a new programme.
Opening the door after the programme has started
First set the machine to pause by pressing the
Start/Pause
button.
The door can be opened.
If the
door
remains locked, this means that the machine is already heating,
that the water level is above the bottom edge of the door. In this case the door
can not be opened.
If you cannot open the door but you need to open it you have to switch the
machine off by turning the selector dial to
O
. After about some minutes the
door can be opened
(pay attention to the water level and temperature!)
.
At the end of the programme
The machine stops automatically, the
Start/Pause
light goes off and a flashing
0
will appear on the display.
If the
Rinse Hold
option have been selected, the
Door
pilot light
illuminates, a flashing
0
will appear on the display, the
Start/Pause
light goes
off and the door remains locked to indicate that the water must be emptied out
before opening the door.
To empty out the water please read the steps on the Rinse Hold option
paragraph.
Turn the programme selector dial to
O
to switch the machine off.
Remove the laundry from the drum and carefully check that the drum is empty.
If you do not intend to carry out another wash, close the water tap. Leave the
door open to prevent the formation of mildew and unpleasant smells.
18
Use
192998381 gb.qxd 9/8/2008 10:12 AM Page 18
