background image

20

30

B

A

D

C

1.

Press the release button (

B

) to open

the lid (

C

).

2.

Put the detergent, in powder or

tablets, in the compartment (

A

).

3.

If the programme has a prewash

phase, put a small quantity of

detergent in the compartment (

D

).

4.

Close the lid. Make sure that the

release button locks into position.

9.2 

Setting and starting a

programme

The AUTO OFF function

This function decreases energy

consumption by deactivating

automatically the appliance when it is not

operating.
The function comes into operation:

• 5 minutes after the completion of the

programme.

• After 5 minutes if the programme has

not started.

Starting a programme

1.

Keep the appliance door ajar.

2.

Press the on/off button to activate

the appliance. Make sure that the

appliance is in programme selection

mode.

3.

Press repeatedly 

 or 

 until the

display shows the number of the

programme you want to start. The

display will show the programme

number for approximately 3 seconds

and then show the programme

duration.

4.

Set the applicable options.

5.

Close the appliance door to start the

programme.

Starting a programme with

delay start

1.

Set a programme.

2.

Press 

 again and again until the

display shows the delay time you

want to set (from 1 to 24 hours).

The delay indicator comes on.

3.

Close the appliance door to start the

countdown.

While a countdown is running it is

possible to increase the delay time but

not to change the selection of the

programme and options.

When the countdown is completed, the

programme starts.

Opening the door while the

appliance operates

If you open the door while a programme

is running, the appliance stops. When

you close the door, the appliance

continues from the point of interruption.

If the door is opened for

more than 30 seconds

during the drying phase, the

running programme will end.

Cancelling the delay start while

the countdown operates

When you cancel the delay start you

have to set the programme and options

again.
Press and hold 

Reset

 until the appliance

is in programme selection mode.

Cancelling the programme

Press and hold 

Reset

 until the appliance

is in programme selection mode.

Make sure that there is detergent in the

detergent dispenser before you start a

new programme.

End of the programme

When the programme is completed the

display shows 0:00 .

1.

Press the on/off button or wait for

the AUTO OFF function to

ENGLISH

13

Содержание FAVORIT55322VI0

























Отзывы: