AEG Electrolux FAVORIT 80873, Руководство пользователя

Страница: 22 / 36

3) During the Auto washing programme the amount of soil on the dishes is determined by how cloudy the water
is. The programme duration, water and energy consumption levels can vary; this depends upon if the appliance
is fully or partially loaded and if the dishes are lightly or heavily soiled. The temperature of the water is
automatically adjusted between 45° C and 70° C.
4) Ideal for washing a partially loaded dishwasher. This is the perfect daily programme, made to meet the needs
of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery.
5) This programme is foreseen with Care Plus function, which gives a greater degree of hygiene to dishes and
glasses. In the last rinse phase the temperature will be held at over 65°C for at least 10 minutes.
6) Test programme for test institutes.
7) This programme does not require the use of detergent
NIGHT CYCLE programme
Night Cycle is a silent washing programme that will not disturb you, even when you sleep.
It can be set at night or in times with a more economical power rate.
During the Night Cycle the pump runs at a very low speed to reach a noise level reduction
of 25% compared to the declaration programme. As a consequence, it has a very long
running time.
Select and start a washing programme
1. Check that the baskets have been loaded correctly and that the spray arms are free to
rotate.
2. Check that the water tap is opened.
3. Press the
ON/OFF
button.
4. Select the washing programme. ( See "Washing programmes chart" ).
5. If required, postpone the start time of the washing programme.
6. Set, if required, the options.
7. Press the
OK / START
button and close the door, the washing programme will start
automatically.
If the delay start has been set, the countdown will start automatically. Once the delay
start has elapsed the programme will start automatically.
The opening of the door will interrupt the countdown. Close the door; the countdown
will continue from the point at which it was interrupted.
WARNING!
Interrupt or cancel a washing programme in progress ONLY if it's absolutely nec -
essary.
Attention! Hot steam may escape when the door is opened. Open the door carefully.
Cancel a delay start or a washing programme in progress
1. Press RESET
button.
2. The message
CONFIRM CANCEL ?
is displayed.
3. Press
OK / START
button to confirm.
4. The appliance returns to setting mode and the message CHOOSE PROGRAMME
is
displayed.
• If a delay start is cancelled, also set the washing programme has been cancelled.
• If a new washing programme is set, check that there is detergent in the detergent dis -
penser.
22 Select and start a washing programme