AEG Electrolux DI9814, Руководство пользователя

Страница: 17 / 20

17
• Carry out electrical connection of control panel and bulbs (17) .
• Join the two bottom sections of the flue covering the support (18)
using 6 screws and springs (3 each side, see the plan diagram for
joining the two sections - springs must be fixed horizontally).
• Insert the bottom section of the flue in its seat so that it completely
covers the motor compartment and electrical connection box, then
ensure it from inside the hood using two screws
(19) .
• Apply the 2 tabs ( 20 - supplied) to cover the fixing points of the
bottom flue (CAUTION! THE BOTTOM FLUE TABS ARE THE
NARROWER AND SHALLOWER ONES).
The wider and deeper tabs are those used for the top flue, and
must be cut to size.
If necessary, slightly expand the tabs to ensure their adherence to
the flue.
• Turn the mains power on again at the central electrical panel and
check for correct hood operation.
18
18
18
18
18
18
18
18
18
18
M
17
X
X
20
20
X
19
19
Fig. 9