AEG Electrolux ARCT IS 82968- G A1, Руководство по эксплуатации

Страница: 6 / 28

6
AEGE 8183970-00/6
Using the freezer
To start the freezer and set the
correct temperature
Press the ON/OFF-button. The green
indicator lamp lights.
The alarm sounds if the temperature
inside the freezer reaches room
temperature. Turn off the alarm by
pressing the switch-off button.
Setting the temperature
Press the buttons "+" raises the
temperature and "-" lowers the
temperature. These bottens are
connected to the temperature display.
ALARM OFF
ON/OFF
FROSTMATIC
TURBO
18
Temperature inside the freezer
To ensure that foodstuff will keep for a long time, be sure that the
temperature inside the freezer is -18°C or below. Please note, however, that
the energy consumption increases as the temperature decreases.
Once set, the temperature display shows the current temperature inside the
freezer.
Allow the cabinet to run for a period of 24 hours whenever the temperature
setting is changed. This will allow the temperature to stabilise inside the
cabinet.
It is not necessary to reset the temperature when the cabinet is switched on
after it has been out of use. The electronics recalls the previously set
temperature.
The temperature display is switched over from the display of the ACTUAL
temperature (Temperature display is illuminated) to the display of the
DESIRED temperature (Temperature display flashes) by pressing one of the
two buttons, "+" (WARMER) or "-" (COLDER).
Each time one of the two buttons is pressed again the DESIRED temperature
is adjusted by 1 °C.
If neither button is pressed, the temperature display automatically switches
back after a short period (approx. 5 sec.) to the display of the ACTUAL
temperature. The ACTUAL temperature in the appliance is now adjusted to
match the preset DESIRED temperature.