background image

5

cause an accident by tipping or spillage.

Never leave the hob unattended when
cooking with oil and fats.

Never use plastic or aluminium foil dishes
on the hob.

Perishable food, plastic items and areosols
may be affected by heat and should not
be stored above or below the hob unit.

This appliance cannot be cleaned with
steam or with a steam cleaning machine.

Service

This hob should only be repaired or
serviced by an authorised Service Engineer
and only genuine approved spare parts
should be used.

Environmental Information

z

After installation, please dispose of the
packaging with due regard to safety
and the environment.

When disposing of an old appliance,
make it unusable, by cutting off the
cable.

It is very important that this instruction book should be kept safely for future consultation.
If the appliance should be sold or given to another person, please ensure that the booklet
goes together with it, so that the new owner can know of the functions of the machine
and also be aware of the warnings.

These instructions are only for the countries stated by the symbol printed on the front cover
of this instruction book.

The symbol

 on the product or

on its packaging indicates that this product
may not be treated as household waste.
Instead it shall be handed over to the
applicable collection point for the recycling
of electrical and electronic equipment. By
ensuring this product is disposed of correctly,
you will help prevent potential negative
consequences for the environment and
human health, which could otherwise be
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
contact your local city office, your household
waste disposal service or the shop where you
purchased the product.

Содержание 75580G-M

































Отзывы: