TAPS REPLACEMENT
Act as follows:
- Switch the appliance off, and close the general
gas tap.
- Remove knobs, grids, burners and flame-
spreaders.
- Disassemble the upper hob as previously
described.
- Follow the indications written in paragraphs A and
B.
- Unscrew nut L of the gas tube to the burner and
disassemble the gas manifold from the hob lower
plate.
- Unscrew screws R fixing the tap to the bridle and
remove the last (see picture).
Note: Every time the tap is replaced, it is necessary to replace seal gasket D too
(see picture).
Once you have finished this procedure, re-assemble everything in the opposite
sense, having care to check with water and soap the gas circuit seal.
A
D
L
R
A
D
R
L
19
19
AR
GB
