AEenergy AE8867220PMHRE Скачать руководство пользователя страница 7

AEenergy Li Polymer Rechargeable Battery

Product Specifications– AE8867220PMHRE 

Specification Number: AE8867220PMHRE -FPS-Spec1 Version 1                                               Page  7/13

6.3.10. Cycle Life 

:

The cycle life shall be conducted as the following procedures

Step 1

charge the cell with the standard charge (as of section 6.3.1);

Step 2

discharge the cell at 4850mA (0.5C) to 2.75V;  

Step 3

repeat Step 1 and Step 2 for 500 times.

The capacity after 300 cycles is expected to be equal to or more than 80%  of  the rated 

capacity. The capacity after 500 cycles is expected to be equal to or more than 60%  of  the rated 

capacity.

6.3.11. Open Circuit Voltage:

3.6V - 4.1V as of shipment.

6.4. Mechanical Performance 

6.4.1. Vibration Test

95%  (min) of Rated Capacity, No Leakage

After standard charge (Section 6.3.1.), the battery is vibrated with an amplitude of 0.8mm (1.6mm 

total maximum excursion) for 60 minutes in three mutually perpendicular directions. The vibration is  
performed between 10Hz and 55Hz at a rate of 1Hz per minute.   

After the completion of the vibration, the capacity shall be measured at a discharge current of 1940mA  

(0.2C) and a cut-off  voltage of 2.75V

6.5. Environmental Performance 

6.5.1. Thermal Shock Test

No Leakage, No Fire, No Explosion

The battery is stored at 75

o

±5

o

C for 48 hours, moved to a temperature of -20

o

±5

o

C within 5 

minutes and stored for 6 hours  after standard charge (Section 6.3.1.).

6.6. Safety Performance

6.6.1. Short Circuit Test

No Fire, No Explosion

After standard charge (Section 6.3.1.), the battery shall be subjected to a short-circuit condition with a 

wire of resistance less than50m

Ω

for 1 hour. 

6.6.2. Overcharge Test                

No Fire, No Explosion

After standard charge (Section 6.3.1.), the battery shall be charged at 2C (19400mA)/10V for 2.0 hrs.

6.6.3. Thermal Exposure Test

No Fire, No Explosion

After standard charge (Section 6.3.1.), the battery is placed in an oven and is heated up at a rate of 

5

o

C until the temperature reaches 130

o

C. The oven shall be maintained at 130

o

C for 60 minutes.

7.  Delivery Condition: 

about 50% charged.

Содержание AE8867220PMHRE












Отзывы: