3.1
Installation Faults
The controller is protected against installation faults such as polarity reversal of the battery and the module, short-circuits at
the connection terminals, reversal of the connection cables (connection of the battery to the load terminals, connection of
the module to the battery or load terminals).
Fault Indications:
Alternate flashing of red and green lamps
Battery connected with reversed polarity
Alternate flashing of red lamps
Various connection faults e.g. no battery connected, battery connected to load output, wrong system voltage.
4
Controller Elements
LED-Status lamps
Programming-LED
Information-LED
Charging status-LED
Next-butto
OK-button
PushbuttonrS
n
Connection terminals
4.1
LED Status Lamps
The charge controller is fitted with 3 LED status lamps. All controller
information may be retrieved using these lamps. In each case the colour of
the LED is crucial for orientation in the individual menu levels.
4.1.1
Programming LED
The programming LED only lights up when the controller is in
programming mode and not during the normal operating mode.
SLX Night Operating Instructions
page 7
