background image

1.4 Operation

 

Do not disconnect the mains cable on the UPS system or the building wiring socket outlet (shockproof socket  

outlet)   during   operations   since   this   would   cancel   the   protective   earthing   of   the   UPS   system   and   of   all 

connected loads.

The UPS system features its own, internal current source (batteries). The UPS output sockets or output 

terminals block may be electrically lived even if the UPS system is not connected to the building wiring socket 

outlet.

In order to fully disconnect the UPS system, first press the Standby switch then disconnect the mains lead 

Ensure that no fluids or other foreign objects can enter the UPS system.

The UPS operates with hazardous voltages. Only qualified maintenance personnel may carry out repairs 

1.5 Maintenance, servicing and faults

The UPS system operates with hazardous voltages. Repairs may be carried out only by qualified 

maintenance personnel.

Caution - risk of electric shock. Even after the unit is disconnected from the mains power supply (building 

wiring socket outlet), components inside the UPS system are still connected to the battery and are still 

electrically live and dangerous.

Before carrying out any kind of servicing and/or maintenance, disconnect the batteries and verify that no 

current is present and no hazardous voltage exist in the terminals of high capability capacitor such as BUS-

capacitors.

Only persons are adequately familiar with batteries and with the required precautionary measures may 

replace batteries and supervise operations. Unauthorised persons must be kept well away from the batteries.

Caution - risk of electric shock. The battery circuit is not isolated from the input voltage. Hazardous voltages 

may occur between the battery terminals and the ground. Before touching, please verify that no voltage is 

present!

Batteries may cause electric shock and have a high short-circuit current. Please take the precautionary 

measures specified below and any other measures necessary when working with batteries:

remove wristwatches, rings and other metal objects

use only tools with insulated grips and handles.

When changing batteries, install the same number and same type of batteries.

Do not attempt to dispose of batteries by burning them. This could cause battery explosion.

Do not open or destroy batteries. Escaping electrolyte can cause injury to the skin and eyes. It may be toxic.

Please replace the fuse only by a fuse of the same type and of the same amperage in order to avoid fire 

hazards.

Do not dismantle the UPS system.

3

Содержание NST3100010















Отзывы: