MOUNTING AND MAINTENANCE
INSTRUCTION
KAOS_IM_ENG - Rev.09 of 03/05/16
Page 2 of 2
Made in Italy
In order to insure double insulation
characteristic of the feeder cable, we
would advise that you first secure the
feeder cable to the internal cable
clamp, remove approximately 25mm
of external sheathing, and 6mm of
sheathing from the internal wires.
< 2 5 mm
6
7 mm
ELECTRICAL LINE CONNECTION
ATTENTION
a)
The luminaire can be installed close to flammable surfaces.
b)
Class II luminaires must be installed in such a way that it is impossible for any exposed metal part to come in contact with electrical
components.
c)
Luminaires for Metal Halide lamps must be always complete with its protective screen.
d)
For luminaires with Metal Halide lamps, damaged protective shields can onl
y be replaced with original AEC Illuminazione’s replacement
shields.
e)
On luminaires for Metal Halide lamps use only UV Stop protected lamps.
f)
This luminaire has been designed and manufactured following all relevant standards. The installation must be done by experienced personnel
and following the instructions.
The present instruction paper has to be kept for any future maintenance operation on the luminaire.
Non compliance with the above will automatically release AEC Illuminazione Srl from any responsibility.
Lamp type
– Weight
Model
Lamp type
Weight [gr]
Plastic cover
Aluminium cover
MBF
SHP E
SHP T
MHL E
MHL T
Empty
Wired
Empty
Wired
80 W
70 W
70 W
70 W
70 W
6.500
8.000
125 W
100 W
100 W
100 W
100 W
5.500
7.000
7.000
8.500
-
150 W
150 W
150 W
150 W
7.500
9.000
250 W
150 W
150 W
-
150 W
6.500
8.500
8.000
10.000
-
250 W
250 W
250 W
250 W
9.500
11.000
-
-
400 W
-
400 W
11.000
12.500
Shape coefficient: 1,2
Wind catching area
0,10 m
2
0,12 m
2
0,20 m
2
0,24 m
2
Dimensions
Dimensions
Bracket Ø 60mm 15°
Bracket Ø 60mm 10°
Bracket Ø 60mm 5°
Bracket Ø 60mm 0°
Bracket Ø 42mm 15°
Bracket Ø 42mm 10°
Bracket Ø 42mm 5°
Bracket Ø 42mm 0°
Pole head Ø 76mm
Pole head Ø 60mm
NO Accessory (bracket 15°)
Accessory 10° (bracket 10°)
Accessory -5° (bracket 5°)
Accessory 0° (bracket 0°)
Mo
unt
ing
Suggested height of installation
Power [W]
H min [m]
H max [m]
70
4
7
150
6
10
400
8
12
Max height of installation: 15m
WIRING SCHEME
70 W
SHP 70 W ÷ 400 W SHP
80 W ÷ 250 W MBF 70 W ÷ 400 W MHL
A
– Ballast
L
– Lamp
f
– Fuse (500V)
C
– Capacitor
Z
– Ignitor
H
DON’T
USE
THIS
POSITION
ATTENTION
: use only the
allowed positions (0° ,-5°,-10°).
Functioning position
Suggested:
α
= 90°
α