Page 6
4. In-wall and In-ceiling Speaker Installation
4. In-wall and In-ceiling Speaker Installation
Before using your Aego Custom Install speakers for the first time make one
final check of the cables and connections. If all appears well begin listening at
a relatively low level to confirm that the system is operating as expected. Only
increase the volume if you are happy with the sound at low levels. If you are
unhappy, turn the system off and re-check all the cables and connections.
The speakers may take a little time to reach normal operating temperatures and to
“run-in”. Your ears too will take some time to adjust to the new sound so revisiting
the speaker installation is best left for a few days.
Your Acoustic Energy speakers are guaranteed against original defects in materials,
manufacture and workmanship for year from the date of purchase.
Under this warranty Acoustic Energy agrees to repair any defect or, at the
company’s discretion, replace the faulty component(s) without charge for parts
or labour. This warranty does not imply any acceptance by Acoustic Energy or its
agents for consequential loss or damage and specifically excludes fair wear and
tear, accident, misuse or unauthorised modification.
This warranty is applicable in the United Kingdom only and does not in any way
limit the customer’s legal rights. If you have reason to claim under the warranty
please contact your dealer in the first instance
Claims and enquiries under the warranty for Acoustic Energy products purchased
outside the UK should be addressed to the local importers or distributors.
Please retain all original packaging materials for possible future use.
For any sales, technical or spares enquiries contact your local dealer or distributor
first.
Products that display the crossed-out wheeled bin
logo cannot be disposed of as domestic waste
but must be taken to a facility capable of re-
cycling them and appropriately handling
any waste by-products. Contact your local
authority for details of the nearest such facility.
7. Contact
Acoustic Energy Limited
16 Bridge Road
Cirencester
Gloucestershire GL7 1NJ
UK
Tel:
+44 (0)1285 654432 (Sales)
+44 (0)1285 656890 (Technical)
Fax:
+44 (0)1285 654430
Email:
Web:
www.acoustic-energy.co.uk
6. Warranty
5. Listening
If the speaker grille is fitted (they are shipped with grilles
removed) remove it by pulling gently from its edges.
Also remove the wax paper sheet and paint mask from
inside the grille. To insert and secure a speaker in a wall
or ceiling proceed as described following.
Diagrams
Three and Four
illustrate in-ceiling and in-wall speakers
offered-up to an appropriate aperture.
•
Ensuring that the fixing clamps are lying flush
against the sides of the speaker, offer the speaker up to
the aperture and hold it in place so that any clearance is
distributed approximately equally around the aperture.
•
Using a No. 2 Pozidriv screwdriver via the access
holes tighten the four or six fixing clamps in turn. As the screws begin to tighten
the fixing clamps will turn outwards and begin to make contact with the rear of
the wall or ceiling. Tighten just enough to pull the speaker solidly and securely in
contact around its entire perimeter. Do not over-tighten and
Do not use a power
driver or drill.
•
Fit the grille by aligning it with its retaining groove and gently pushing from
its edges. The logo badge is removable and can be repositioned to suit.
