AE Techron LVC2016, Техническое руководство

Страница: 21 / 48

Pre-Installation 1-11
1.2.5 Details of the LVC 608/623/2016 Series Plug-In Module
Pin Function
1,2, Available for additional features
3,4 Standby, When Pins 3 and 4 are shorted output section of amplifier forced
into standby.
5 Ground pin for use with pins 6, 7, and 8
6 Voltage monitor, will have 1/20th of voltage at output of Channel 2. Pin 6
is inactive when amplifier is used in either mono mode.
7 Current monitor, will have 1 volt for every 3 amps of current at output of
Channel 2, pin is inactive when amplifier is used in either mono mode.
8 When in Constant Current -mode provides a user definable maximum
current, when in Constant Voltage mode provides a user definable
maximum voltage for Channel 2. Uses control voltages of 0 - +8 VDC.
Pin is inactive when amplifier is used in either mono mode.
9-11 Balanced input for Channel 2. Pins 9 or 11 can be connected to Pin 10 if
an unbalanced input is desired. Pins 9 and 11 are not active when
amplifier is used in either mono mode.
12 Ground pin for use with pins 13, 14, and 15.
13 Voltage monitor, will have 1/20th of voltage at output of Channel 1, when
operated in 2 channel or Parallel Mono mode and 1/40th of the voltage
when operated in Bridged Mono mode. Pin 13 is active in all modes of
operation.
14 Current monitor will have 1 volt for every 3 amps of current at output of
Channel 1, when operated in 2 channel or Bridge Mono mode. When
operated in Parallel Mono mode 1 volt for every 6 amps of output current.
Pin 14 is active in all modes of operation.
15 When in Constant Current mode provides a user definable maximum
current, when in Constant Voltage mode provides a user definable
maximum voltage for Channel 1. Uses control voltages of 0 - +8VDC.
Pin 15 is active in all modes of operation.
16-18 Balanced input for Channel 1. Pins 16 or 18 can be connected to Pin 17 if
an unbalanced input is desired. Pins 16 and 18 are active in all modes of
operation.