manualshive.com logo in svg

AE Techron LV 3620, Руководство оператора

Поделиться
Скачать
AE Techron LV 3620 Скачать руководство пользователя страница 3

About AE Techron model LV 3620

Model LV 3620 is a proven performer in AE Techron's medium power, high
voltage line of industrial amplifiers.  This two channel, voltage mode amplifier
will provide years of reliable performance under demanding conditions.
Features of the amplifiers include:

• Output power for each channel is 286 watts rms into a 4–ohm load.
• Designed to survive input overloads, continuous operation under de-

manding conditions and improper output connections–including shorted
and improper loads.

• Front panel indicators for rapid assessment of amplifier status.
• The amplifier installs into a standard 19 inch rack in 2U of rack space.

Aluminum construction for minimum weight and maximum cooling.

• Shipped ready to operate from 120 volt ac mains at 50–60 Hz.

This manual covers basic operation for AE Techron amplifier model LV 3620.  It is written
for electronic technicians and engineers that need to incorporate the amplifiers into their
systems.  It does not contain service information.

Copyright 1998 by AE Techron.  Printed in the United States of America.  All
rights reserved.  No part of this publication may be reproduced in any form
without the prior written consent of AE Techron.

a

Содержание LV 3620
































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды