5
02.2020
INV250 / INV350 / INV500
3.0 Notes on liability, warranty and service
The following information relates to liability, warranty and
service.
3.1 Intended use and liability
The AEconversion PV inverter converts the DC voltage generated
by PV modules into AC voltage and feeds this into the grid. Any
other use or use that goes beyond this is considered improper
use. The manufacturer/supplier is not liable for any damage
resulting from this. The risk is borne solely by the operator.
Intended use also includes observing the operating and
installation instructions. Some of the documents you need for
the registration and acceptance of your photovoltaic system are
attached to the installation instructions.
The inverter may only be operated with a fixed connection to
the public grid. The inverter is not intended for mobile use.
Modifications to the inverter are generally prohibited. For
changes in the environment, you must always consult a qualified
electrician.
3.2 Guaranty and Warranty
AEconversion grants a statutory warranty of 10 years from the
date of purchase on the inverters. In addition, AEconversion
grants a further multi-year limited warranty.
If you have any questions about the warranty, please contact
your specialist dealer or installer. If your device has a defect or
malfunction during the warranty period, please also contact
your specialist dealer or installer.
Warranty claims are excluded in the event of:
•
Unauthorised modifications to the unit or repair attempts
•
Opening the inverter, for example by unscrewing the cover
•
Non-intended use of the units
•
Improper installation that does not comply with the standards
•
Improper operation
•
Operating the units with defective protective devices
•
Impact of foreign bodies and force majeure (lightning,
overvoltage, thunderstorms, fire)
•
Insufficient or non-existent ventilation of the unit
•
Non-observance of safety regulations
•
Transport damage
•
Use of non-original PV mating plugs and sockets from the
HELIOS H4 product series by Amphenol
- If you mount the inverters at a great height, avoid
possible risks of falling.
- Do not insert any electrically conductive parts
into the plugs and sockets! Tools must be dry.
- The electrical connection to the central building
services may only be carried out by a licensed
electrician.
- Do not tamper with or manipulate the inverter or
other parts of the system under any circumstances.
- Risk of damage due to improper modifications!
2.2 CE Mark
The CE mark documents that the inverter fulfills the basic
requirements of the following relevant directives according to
the type plate:
•
Electromagnetic Compatibility
2014/30/EU
Low
Voltage
Directive
2014/35/EU
For CE declaration of conformity, see page 24.
2.3 Label
The label is located on the top or on the side edge of the
inverter. The information on the label includes the technical data
as well as the article and serial number of the device.
Safety instructions on the type plate are listed and explained
below:
Danger! „
Danger“ indicates a situation which, if
not avoided, will result in personal injury.
Attention! „Attention“ indicates a situation which,
if not avoided, may result in damage to property.
Observe operating instructions!
Under „Observe operating instructions“ it
is pointed out that assembly and operating
instructions must be read and understood before
assembly, installation and maintenance.
Caution hot surface!
Under „Caution hot surface“ it is pointed out that
surfaces of devices could be hot and there is a risk
of burns.
Observe special disposal!
Under „Observe special disposal“ it is pointed
out that this product must not be disposed of
with normal waste. Improper disposal may cause
damage to the environment.
