Page | © 2016 Adyen BV | Confidential
4
1.
2.
3.
4.
5.
6.
7.
8.
1.
2.
3.
4.
a.
b.
c.
d.
5.
Connecting the VX690 to your wireless network
Press
+ .
9
Enter the security code to unlock the device.
If you do not know the code, contact the
to obtain the specific security code
Adyen POS Support Team
for your device.
Choose
.
Network config
Choose
.
Setup Wi-Fi
Choose
Scan...
The device scans for available networks.
Choose the desired network you want to connect the device to.
If prompted, enter the passcode to access the Wi-Fi network.
Boarding the terminal - VX690
Board the terminal only after successfully following the steps in Getting Started.
Boarding the terminal with the Adyen App
Place the VX690 terminal on the cradle to charge the device and to power it on.
To fully charge the terminal, place it on the cradle for at least 6 hours, until the led indicator remains lit.
Press
to open the
menu.
+ 9
Admin
Choose
.
Network config
Choose
Setup wifi.
Choose "
to find your broadcasted wireless network.
Scan..."
If your network uses a Hidden SSID, you must choose "
" and enter in your SSID
Manual...
followed by your network password.
Choose the desired network from the list of available wireless networks and enter the password.
Once the password has been entered successfully, the network will be listed under
.
Profiles
Choose the desired network from the
list and press
.
Profiles
Press
to set the network as default.
The terminal will display the message "Activating profile". Once complete, the wifi connection
should appear in the profiles list as default and active.
Press
to go back to the Network Config Menu, once the WiFi profile is activated.
