5
This model is supplied complete with:
•
A76309
conductivity probe with built-in temperature
sensor and 1 m cable
• Calibration solutions at 1413 µS/cm and 12.88 mS/cm
and 111.8 mS/cm (20 ml sachet each)
• 12 Vdc power adapter
• Probe holder
• User manual
32
TO DELETE STORED DATA
The meter allows to delete a single sample or all the
memory at one time.
To delete a single sample proceed as follows:
• Enter the viewing stored data mode and select the de-
sired sample number.
• Press the HOLD key. "dEL" and
"CFM" will start blinking.
• Press CFM to confirm deletion.
Note:
Press HOLD key again to escape without de-
leting data. When scrolling through stored data,
if a deleted sample is selected, the meter will
display the "nuLL" message.
To delete all data in memory:
• Enter the viewing stored data mode.
• Press SHIFT+HOLD keys. "dEL" and "CFM" will start
blinking and the "ALL" message is displayed on the
secondary LCD.
• Press CFM to confirm
deletion.
