5
AD130 is supplied complete with:
• AD2005B/1 pH electrode with Epoxy body, tip pro-
tection bottle, BNC connector and 1 m cable
• AD5006 stainless steel temperature probe, 1 m cable
• pH 4.01, pH 7.01 and pH 10.01 buffers (100 ml bottle)
• Electrode rinsing solution, 100 ml bottle
• Holders for pH electrode and temperature probe
• 1.5V AA alkaline batteries (4 pcs)
• User manual
•
Rugged carrying case
32
TROUBLESHOOTING GUIDE
SYMPTOM
Slow response/
excessive drift.
Reading
fluctuate up and
down (noise).
The display
shows blinking
full scale value.
mV scale out
of range.
Display shows
blinking °C or °F.
PROBLEM
Dirty pH electrode.
Clogged/dirty
junction.
Reading out of
range.
Dry membrane or
dry junction.
Temperature probe
is not connected or
out of order.
SOLUTION
Soak the electrode
tip in AD6050
solution for 30
minutes and then
follow the storage
procedure.
Clean the electrode.
Check that sample
is within measurable
range. Check
electrolyte level and
general electrode
status.
Soak electrode in
AD6060 storage
solution for at least
30 minutes.
Connect or replace
temperature probe.
