a. After your body is in a comfortable position, press the “ ”
button. After a long “beep”, BPM will verify itself, and LCD will
display all automatically. (See Picture 3)
b. Then you will see on screen “U1” or “U2” indicating the Group
of memory in which the measurement shall be recorded
(see Picture 3-1 & 3-2). If you want to change the group press the
“M” button and then press the “ ” button to confirm your choice.
c. After you confirm the current group, if it already has memory in
this group, LCD will show the latest result. (See picture 3-3) If the
machine has no memory, the LCD will show zeros.
(See picture 3-4).
5. Measuring Process
d. A few seconds later, LCD shows a single “0”. (See picture 3-5).
e. Then the monitor begins to pressurize automatically.
f. During the measurement, the pressure number will appear on screen. The sign of heart will be displayed
intermittent while the pressure starts going down. (See picture 3-6 & 3-7).
g. After measurement, the result of systolic, diastolic and pulse rate will all display on LCD. The irregular
heartbeat symbol (if any) and blood pressure classification indicator will twinkle. (See picture 3-8). The results
are automatically recorded in the previously selected memory.
h. Press “ ” at the end of measurement to turn off the BPM. You can do the same if you want to stop the
measurement at any time. The BPM goes off automatically after a few minutes of no use.
The following standards for assessing high blood pressure (without regard to age or gender) have been
established as a guideline according to WHO (World Health Organization). Please note that other risk factors
(e.g. diabetes, obesity, smoking, etc.) need to be taken into consideration and may affect these figures. Consult
with your physician for accurate assessment.
6. Assessing High Blood Pressure for Adults
WHO/ISH Definition and Classification of Blood Pressure Levels
Classification of blood pressure for adults
a. Press the “M”; the group “U1” will appear intermittent on the LCD.
If you want to change group, press the “ ” button, the “U2” group will
appear intermittent, if you want to go back again to the group “U1” just
press “ ” (see Figure 4 & 4-1). Once you choose the memory group,
press the “M” button to confirm your selection, the group number will
display constant.
b. Once the group has been selected, the most recent result appears on
screen with the number 01. (See Picture 4-2) The irregular heartbeat (if
nay) and the blood pressure classification will also appear together with
the time and date of measurement. To move to the following memory
press “M” and so forth until you reach the end of the memory or the result
that you are seeking for. (See picture 4-3)
7. Reading Memory Results
c. Press “M” again after the last memory to turn off the machine or it will
power off after a few minutes of no use. To exit Memory at any point press “ ”
and the machine will turn off immediately.
d. If it has no memory (or all memories have been deleted), the LCD will show
“0” for systolic, diastolic, heart rate, and show “00” for the numbers of memory.
(See picture 4-4) Press the “ ” button and the machine will power off.
Press the “M” button, choose the group of memory you
want to delete, once one of the readings is displayed, press
“M” and hold for three seconds or until you see “--” (see
Figure 5) Press again “M” and it will power off.
8. Deletion of Memories
Abnormality & Troubleshooting (1)
If you cannot resolve the problem you can contact the
factory or customer service department
1-866-373-2824
Distributed by
Diabetic Supply of Suncoast, Inc.
HC 3 Box 7017
Dorado, PR 00646
www.dsosi.com
After each measurement press the “ ” button to power off the machine. After
one minute of non-use the machine will power off.
9. Shut Down
measurement shall be recorded (see Figure 3-1 & 3-2). If you want to change the
group press the "M" button and than press the “O” button to confirm your choice.
Picture 3
Picture 3-1
Picture 3-2
c.
After you confirm the current group, if it already has memory in this group, LCD will
show the latest result.
(See picture 3-3)
If the machine has no memory, the LCD will
show zeros. (
See picture 3-4)
Picture 3-3
Picture 3-4
d.
A few seconds later, LCD shows a single “0”.
(See picture 3-5)
Picture 3-5
e.
Then the monitor begins to pressurize automatically.
f.
During the measurement, the pressure number will appear on screen. The sign of heart
will be displayed intermittent while the pressure starts going down. (
See picture
measurement shall be recorded (see Figure 3-1 & 3-2). If you want to change the
group press the "M" button and than press the “O” button to confirm your choice.
Picture 3
Picture 3-1
Picture 3-2
c.
After you confirm the current group, if it already has memory in this group, LCD will
show the latest result.
(See picture 3-3)
If the machine has no memory, the LCD will
show zeros. (
See picture 3-4)
Picture 3-3
Picture 3-4
d.
A few seconds later, LCD shows a single “0”.
(See picture 3-5)
Picture 3-5
e.
Then the monitor begins to pressurize automatically.
f.
During the measurement, the pressure number will appear on screen. The sign of heart
will be displayed intermittent while the pressure starts going down. (
See picture
measurement shall be recorded (see Figure 3-1 & 3-2). If you want to change the
group press the "M" button and than press the “O” button to confirm your choice.
Picture 3
Picture 3-1
Picture 3-2
c.
After you confirm the current group, if it already has memory in this group, LCD will
show the latest result.
(See picture 3-3)
If the machine has no memory, the LCD will
show zeros. (
See picture 3-4)
Picture 3-3
Picture 3-4
d.
A few seconds later, LCD shows a single “0”.
(See picture 3-5)
Picture 3-5
e.
Then the monitor begins to pressurize automatically.
f.
During the measurement, the pressure number will appear on screen. The sign of heart
will be displayed intermittent while the pressure starts going down. (
See picture
measurement shall be recorded (see Figure 3-1 & 3-2). If you want to change the
group press the "M" button and than press the “O” button to confirm your choice.
Picture 3
Picture 3-1
Picture 3-2
c.
After you confirm the current group, if it already has memory in this group, LCD will
show the latest result.
(See picture 3-3)
If the machine has no memory, the LCD will
show zeros. (
See picture 3-4)
Picture 3-3
Picture 3-4
d.
A few seconds later, LCD shows a single “0”.
(See picture 3-5)
Picture 3-5
e.
Then the monitor begins to pressurize automatically.
f.
During the measurement, the pressure number will appear on screen. The sign of heart
will be displayed intermittent while the pressure starts going down. (
See picture
measurement shall be recorded (see Figure 3-1 & 3-2). If you want to change the
group press the "M" button and than press the “O” button to confirm your choice.
Picture 3
Picture 3-1
Picture 3-2
c.
After you confirm the current group, if it already has memory in this group, LCD will
show the latest result.
(See picture 3-3)
If the machine has no memory, the LCD will
show zeros. (
See picture 3-4)
Picture 3-3
Picture 3-4
d.
A few seconds later, LCD shows a single “0”.
(See picture 3-5)
Picture 3-5
e.
Then the monitor begins to pressurize automatically.
f.
During the measurement, the pressure number will appear on screen. The sign of heart
will be displayed intermittent while the pressure starts going down. (
See picture
3-6&3-7)
g.
After measurement, the result of systolic, diastolic and pulse rate will all display on
LCD. The irregular heartbeat symbol (if any) and blood pressure classification indicator
will twinkle. (
See picture 3-8).
The results are automatically recorded in the
previously
selected memory
.
Picture 3-6 Picture 3-7 Picture 3-8
h.
Press "O" at the end of measurement to turn off the BPM. You can do the same if you
want to stop the measurement at any time. The BPM goes off automatically after a few
minutes of no use.
4.
Assessing High Blood Pressure for Adults
The following standards for assessing high blood pressure (without regard to age or gender) have
been established as a guideline according to WHO (World Health Organization). Please note that
other risk factors (e.g. diabetes, obesity, smoking, etc.) need to be taken into consideration and
may affect these figures. Consult with your physician for accurate assessment.
0
3-6&3-7)
g.
After measurement, the result of systolic, diastolic and pulse rate will all display on
LCD. The irregular heartbeat symbol (if any) and blood pressure classification indicator
will twinkle. (
See picture 3-8).
The results are automatically recorded in the
previously
selected memory
.
Picture 3-6 Picture 3-7 Picture 3-8
h.
Press "O" at the end of measurement to turn off the BPM. You can do the same if you
want to stop the measurement at any time. The BPM goes off automatically after a few
minutes of no use.
4.
Assessing High Blood Pressure for Adults
The following standards for assessing high blood pressure (without regard to age or gender) have
been established as a guideline according to WHO (World Health Organization). Please note that
other risk factors (e.g. diabetes, obesity, smoking, etc.) need to be taken into consideration and
may affect these figures. Consult with your physician for accurate assessment.
0
3-6&3-7)
g.
After measurement, the result of systolic, diastolic and pulse rate will all display on
LCD. The irregular heartbeat symbol (if any) and blood pressure classification indicator
will twinkle. (
See picture 3-8).
The results are automatically recorded in the
previously
selected memory
.
Picture 3-6 Picture 3-7 Picture 3-8
h.
Press "O" at the end of measurement to turn off the BPM. You can do the same if you
want to stop the measurement at any time. The BPM goes off automatically after a few
minutes of no use.
4.
Assessing High Blood Pressure for Adults
The following standards for assessing high blood pressure (without regard to age or gender) have
been established as a guideline according to WHO (World Health Organization). Please note that
other risk factors (e.g. diabetes, obesity, smoking, etc.) need to be taken into consideration and
may affect these figures. Consult with your physician for accurate assessment.
0
5.
Reading result in Memory
a.
Press the "M"; the group “U1” will appear intermittent on the LCD. If you want to change
group, press the "O" button, the "U2" group will appear intermittent, if you want to go back
again to the group "U1" just press "O" (see Figure 4 & 4-1). Once you choose the memory
group, press the "M" button to confirm your selection, the group number will display
constant.
Picture 4
Picture 4-1
b.
Once the group has been selected, the most recent result appears on screen with the number
01. (See Picture 4-2) The irregular heartbeat (if nay) and the blood pressure classification
will also appear together with the time and date of measurement. To move to the following
memory press "M" and so forth until you reach the end of the memory or the result that you
are seeking for. (See picture 4-3)
Picture 4-2
Picture 4-3
c.
Press “M” again after the last memory to turn off the machine or it will power off after a few
minutes of no use. To exist Memory at any point press “O” and the machine will turn off
immediately.
5.
Reading result in Memory
a.
Press the "M"; the group “U1” will appear intermittent on the LCD. If you want to change
group, press the "O" button, the "U2" group will appear intermittent, if you want to go back
again to the group "U1" just press "O" (see Figure 4 & 4-1). Once you choose the memory
group, press the "M" button to confirm your selection, the group number will display
constant.
Picture 4
Picture 4-1
b.
Once the group has been selected, the most recent result appears on screen with the number
01. (See Picture 4-2) The irregular heartbeat (if nay) and the blood pressure classification
will also appear together with the time and date of measurement. To move to the following
memory press "M" and so forth until you reach the end of the memory or the result that you
are seeking for. (See picture 4-3)
Picture 4-2
Picture 4-3
c.
Press “M” again after the last memory to turn off the machine or it will power off after a few
minutes of no use. To exist Memory at any point press “O” and the machine will turn off
immediately.
5.
Reading result in Memory
a.
Press the "M"; the group “U1” will appear intermittent on the LCD. If you want to change
group, press the "O" button, the "U2" group will appear intermittent, if you want to go back
again to the group "U1" just press "O" (see Figure 4 & 4-1). Once you choose the memory
group, press the "M" button to confirm your selection, the group number will display
constant.
Picture 4
Picture 4-1
b.
Once the group has been selected, the most recent result appears on screen with the number
01. (See Picture 4-2) The irregular heartbeat (if nay) and the blood pressure classification
will also appear together with the time and date of measurement. To move to the following
memory press "M" and so forth until you reach the end of the memory or the result that you
are seeking for. (See picture 4-3)
Picture 4-2
Picture 4-3
c.
Press “M” again after the last memory to turn off the machine or it will power off after a few
minutes of no use. To exist Memory at any point press “O” and the machine will turn off
immediately.
5.
Reading result in Memory
a.
Press the "M"; the group “U1” will appear intermittent on the LCD. If you want to change
group, press the "O" button, the "U2" group will appear intermittent, if you want to go back
again to the group "U1" just press "O" (see Figure 4 & 4-1). Once you choose the memory
group, press the "M" button to confirm your selection, the group number will display
constant.
Picture 4
Picture 4-1
b.
Once the group has been selected, the most recent result appears on screen with the number
01. (See Picture 4-2) The irregular heartbeat (if nay) and the blood pressure classification
will also appear together with the time and date of measurement. To move to the following
memory press "M" and so forth until you reach the end of the memory or the result that you
are seeking for. (See picture 4-3)
Picture 4-2
Picture 4-3
c.
Press “M” again after the last memory to turn off the machine or it will power off after a few
minutes of no use. To exist Memory at any point press “O” and the machine will turn off
immediately.
d.
If it has no memory (or all memories have been deleted), the LCD will show “0” for systolic,
diastolic, heart rate, and show “00” for the numbers of memory. (See picture 4-4)
Press the
“O” button and the
machine will power off.
Picture 4-4
Picture 5
6.
Deletion of Memories
Press the "M" button, choose the group of memory you want to delete, once one of the readings is
displayed, press "M" and hold for three seconds or until you see "--" (see Figure 5) Press again
"M" and it will power off.
d.
If it has no memory (or all memories have been deleted), the LCD will show “0” for systolic,
diastolic, heart rate, and show “00” for the numbers of memory. (See picture 4-4)
Press the
“O” button and the
machine will power off.
Picture 4-4
Picture 5
6.
Deletion of Memories
Press the "M" button, choose the group of memory you want to delete, once one of the readings is
displayed, press "M" and hold for three seconds or until you see "--" (see Figure 5) Press again
"M" and it will power off.
diastolic, heart rate, and show “00” for the numbers of memory. (See picture 4-4)
Press the
“O” button and the
machine will power off.
Picture 4-4
Picture 5
6.
Deletion of Memories
Press the "M" button, choose the group of memory you want to delete, once one of the readings is
displayed, press "M" and hold for three seconds or until you see "--" (see Figure 5) Press again
"M" and it will power off.
Abnormality & Troubleshooting
Abnormality
Reason
Checkout
LCD shows low battery
symbol
Batteries low
Change the batteries
LCD shows “Er 0”
Pressure system is unstable
before measurement.
LCD shows “Er 1”
Systolic pressure detect failed
LCD shows “Er 2”
Diastolic pressure detect failed
Don’t move and try again.
LCD shows “Er 3”
Pneumatic system blocked or
cuff is too tight during inflation
LCD shows “Er 4”
Pneumatic system leakage or cuff
is too loose during inflation
Place the cuff correctly and try
again
LCD shows “Er 5”
Inflation above 300mmHg
LCD shows “Er 6”
Over 3 minutes while pressure
above 15 mmHg
LCD shows “Er 7”
EEPROM accessing error
LCD shows “Er 8”
Device parameter check error
Measure again after 5 minutes.
If the monitor is still abnormal,
please
contact
the
local
distributor or the factory.
Diastolic
(mmHg)
35104_wrist BPM 7902B manual.indd 2
8/12/09 11:46:10 AM
