advidia VP-16 Series, Руководство пользователя

Страница: 7 / 32

6

Read-only HDD Property Settings
The HDD can be set to read-only property so as to protect important data.
Network

One 10/100/1000Mbps self-adaptive UTP Ethernet interface;

Support TCP/IP, UDP, RTP and RTSP network protocols;

Capable of searching encoder through SADP software, as well as modifying the IP address, sub mask and
gateway of the encoder;

RTSP/RTP standard stream media protocol allows user to live view by Unicast;

Bi-directional voice talk and single-directional broadcasting;

Transmission via RS-232 and RS-485 transparent channels;

Access to Internet by PPPoE method, and support Peanut Hull, Dyndns, HIK protocol, etc.;

Set time by NTP;

Remote JPEG image capturing with user-defined image resolution and quality.
PTZ Control

Support Multiple PTZ Protocols
Different channels can be configured with protocol type, RS-485 address, baud rate, data bit, stop bit, even & odd
parity, stream control method, etc.; and remote configuration of presets, patrols and patterns.

Digital Zooming (with Speed Dome)
When connected with the speed dome, digital zooming can be realized by clicking on the image through client
software.

PTZ linkage
Relay input alarm can be responded to with PTZ linkage actions, e.g., callup of predefined presets, patrols or
patterns.
Alarm

Relay Alarm Input
Either NO mode or NC mode can be set;
Four different alarm arming periods are configurable;
Capabilities of triggering corresponding alarm handling methods, relay alarm output, buzzer alarm, upload to
control center, PTZ linkage, presets/patrols/patterns callup, etc.

Relay Alarm Output
Relay alarm output can be connected with alarm devices for alarm handling within arming period.
Exceptions

Exception Alarm Handling
Exception alarms include network disconnect alarm, IP address conflict alarm, illegal access alarm, etc.; multiple
alarm handling methods are supported, relay alarm output, buzzer alarm, upload to center, etc.

Exception Reboot
Software watchdog capability: for inspecting important tasks and system resources of device; in case of exceptions
detected, the device will be automatically rebooted.
Firmware watchdog: for inspecting the firmware of device; in case of exceptions in system task scheduling, the
device will be automatically rebooted.
User Administration
A maximum of 32 users can be created by the system, including 1 administrator and 31 users. The user name of the
administrator is admin , which cannot be modified, and the password can be modified by the administrator only; no
deletion of the administrator is allowed, and the administrator is authorized to set the operation permissions for
normal users.
Logs