7
1.
Locate the positions of the holes. Paste installation positioning stickers on the
ceiling and lead the cables through the hole on the wall.
!
2.
Mount your camera.
!
3.
Adjust the monitoring direction of the lens. Tighten the screws after vertically
adjusting the lens.
!
Paste the drill template and lead the
cables through the hole. Use a Ø6mm-
6.5mm drill bit to drill 30 mm-depth
guide holes according to the template.
Knock the plastic rivets into the
guide holes and ensure that they
are tightened up.
1
2
1
Connect all cables of the ceiling
and your camera.
Lead self-tapping screws
through the guide holes in the
camera base, and fix your
camera on the ceiling by using
a screwdriver.
2
Lens base
Rotate the lens base
horizontally.
1
Fastening screw
2
Loosen the fastening
screws and rotate the
lens vertically.
Lens
Rotate the lens horizontally.
3
