3
abnormally. If it is required to lengthen the power cable, lengthen the cable between the
power adapter and the mains.
Do not overbend the cables during the installation, otherwise, poor cable contact may
cause malfunction.
When connecting to an external interface, use an existing connection terminal, and
ensure that the cable terminal (latch or clamp) is in good condition and properly fastened.
Ensure that the cable is not tense during mounting, with a proper margin reserved to
avoid poor port contact or loosening caused by shock or shake.
During transportation, special attention is required to protect the transparent dome cover
from friction, scratch and stain, etc. Do not remove the protective film from the cover until
mounting is finished. Remove the protective film before powering on the device.
Contact professionals for maintenance information. Do not attempt to dismantle the
device by yourself. We shall not assume any responsibility for problems caused by
unauthorized repair or maintenance.
2.2
Maintenance
If there is grease or a dust stain on the front glass surface, clean the glass surface gently
from the center outward using anti-static gloves or an oil-free cloth. If the grease or the
stain still remains, use anti-static gloves or an oil-free cloth dipped with detergent and
clean the glass surface gently until it is clean.
If there is dust on the front glass surface, remove the dust gently using an oil-free brush
or a rubber dust blowing ball.
Do not use organic solvents (benzene, alcohol, etc) to clean the camera.
3
Appearance
The appearance and tail cable may vary with device model.
4
Mount Your Camera
4.1
(Optional) Insert the Micro SD Card
For cameras that support Micro SD, you need to insert the Micro SD card after opening the
bottom cover of camera. Do not hot plug the Micro SD card after it is inserted. Otherwise the
camera or the SD card might be damaged. For recommended SD card specifications, please
contact your dealer or technical support.
