advidia A-28-Z, Быстрый старт

Страница: 10 / 28

Network Bullet Camera
·
Quick Start Guide
10
10
No. Description
6 Power Cable Interface
7 Alarm Cable Interface
8 Video Cable Interface
9 Audio Out
10 Audio In
11 Reset Button
12 Micro SD Card Slot
13 Serial Port

The standard power supply is 12V DC, please make sure your
power supply matches with your camera.

Press RESET about 10s when the camera is powering on or
rebooting to restore the default settings, including the user name,
password, IP address, port No., etc.
1.2
Micro SD Card Installation
This series of camera supports micro SD card installation. Please
follow the steps below to install the micro SD card.
1. Loosen the two lock screws at the bottom of the bullet camera,
and then remove the slot cover.