advidia A-200 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 104

advidia A-200 Скачать руководство пользователя страница 3

Advidia A200 User Manual

1

General

This  document  is  intended  for  administrators  and  users  of  the  Advidia  A-200
Network  Speed  Dome  v4.2.4.  This  guide  contains  information  for  configuring,
managing
and using the unit in your environment, as well as a general overview of the product
functionality.  Readers  are  recommended  to  use  this  document  as  a  reference.  If
there  are  any  questions,  or  requests,  please  do  not  hesitate  to  contact  us  at

http://advidia.com/index.php?main_page=contact_us

. We will improve and update

the products or procedures described in the manual as needed.

DISCLAIMER STATEMENT

“Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability
of the security or signaling aspects of this product. UL has only tested for fire, shock
or  casualty  hazards  as  outlined  in  UL’s  Standard(s)  for  Safety,  UL60950-1.  UL
Certification does not cover the performance or reliability of the security or signaling
aspects  of  this  product.  UL  MAKES  NO  REPRESENTATIONS,  WARRANTIES  OR
CERTIFICATIONS  WHATSOEVER  REGARDING  THE  PERFORMANCE  OR  RELIABILITY  OF
ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.”

«
1
2
3
4
5
...
»

Содержание A-200









































































































Отзывы:

Нет отзывов