Adventuridge WS-9918, Руководство пользователя

Страница: 10 / 14

First use
10
and do not use a steam cleaner to clean it. Otherwise, the light
could be damaged.
− Never place the light in the dishwasher. It would be destroyed
as a result.
− Do not use the light if the plastic components of the light
exhibit cracks or breaks or are deformed. Replace damaged
parts only with compatible original spare parts.
− The use of accessories and device parts which are not
expressly recommended by the manufacturer can cause
damage and invalidate the warranty.
First use
Checking the light and product contents
NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a sharp
knife or other pointed objects, you may easily damage the light.
− Be very careful when opening the packaging.
1. Take the light out of the packaging.
2. Check to make sure that the delivery is complete (see
Fig. A
).
3. Check whether the light or individual parts show signs of damage. If this is
the case, do not use the light. Contact the manufacturer at the service address
specified on the warranty card.
Inserting or changing the batteries
1. In order to open the battery compartment cover
2
, rotate it away from the
housing in an anti-clockwise direction (see Fig. B ).
2. If applicable, remove the old batteries first.
3. Insert three 1.5 V batteries
, type AA/LR6 into the battery compartment. Make
sure the polarity (+/-) of the batteries is correct.
4. Put the battery compartment cover back on the housing by turning it until tight in
a clockwise direction.