Use
13
5. Fold the two fibreglass poles
8
for the outer tent apart and connect the individ-
ual pole elements in sequence.
6. Run the two fibreglass poles with the plastic end forward into one of the two tun-
nel guides
20
on the outer tent one after another and slide them through to the
end (see
Fig. A
and
B
).
7. Lift one of the two fibreglass poles and push it no further into the tunnel guide un-
til you can insert the metal pin
21
into the metal end of the fibreglass pole to fix it
in place (see
Fig. B, C
and
D
).
The fibreglass pole will erect itself and is under tension.
8. Repeat this process with the other fibreglass pole.
9. Push the fibreglass pole
7
of the awning through the tunnel guide
1
on the
awning so that it evenly protrudes on both sides of the tunnel guide.
10. Insert the free metal pin on the one side of the fibreglass pole into the metal end
of the fibreglass pole.
11. Tension the fibreglass pole by sliding it all the way through the tunnel guide and
up against the metal pin. The fibreglass pole will bend.
12. Fix the tensioned fibreglass pole in place by inserting the free metal pin in the
open metal end.
13. Attach the two fastening hooks
22
on the front side of the inner tent to the two
metal loops
23
(see
Fig. E
).
14. Attach the two fastening hooks on the back of the tent to the plastic loops
24
(see
Fig. F
).
15. Insert the pegs in the ground through the fastening loop
6
of the inner tent
(see
Fig. A
).
16. Lay the ground tarpaulin
11
in front of the entrance to the inner tent. Align the
recess
10
of the ground tarpaulin with the fastening loop
6
of the inner tent.
17. Hook the two fastening hooks of the ground tarpaulin
12
into the two metal
loops on the outer tent.
18. Close the entrances
3
/
19
of the inner tent and the awning.
19. Use the pegs to secure all fastening loops
18
on the outer tent in the ground.
In the process, keep in mind that the pegs for the fastening loops on the left and
right of the entrance to the awning must also run through the fastening loops
13
of the ground tarpaulin.
20. If applicable, secure the guy line to the tensioning triangles of the outer tent.
21. If necessary, use the guy lines to secure your tent against wind.
22. Open the ventilating windows
25
and secure them with the spacers
26
(see
Fig. G
).
