Advent LCDM40A Скачать руководство пользователя страница 3

 

 

 

Warnings 

 

The product is intended to assist in safe driving and to allow the driver to 
have a broader rear view while the vehicle is in reverse. You, as the 
driver, are solely responsible for the safe operation of your vehicle and 
the safety of your passengers according to local traffic regulations. Do not 
use any features of this system to the extent it distracts you from safe 
driving. Your first priority while driving should always be the safe 
operation of your vehicle. Audiovox Electronics Corporation cannot 
accept any responsibility whatsoever for accidents resulting from failure 
to observe these precautions or safety instructions. 

1.

 

This product utilizes high voltage. Any unauthorized modifications or 
damage to the product may result in electrical shock. Handle all 
components with care. Inspect regularly for damage to components 
and cabling.  

2.

 

You are responsible for ensuring that the installation of this product 
does not void or affect the vehicle manufacturer’s warranty. 
Audiovox Electronics Corporation or its subsidiaries are not liable in 
full or in part for improper installation resulting in loss or damage to 
your property, or for voiding all or part of the vehicle manufacturer’s 
warranty.  

3.

 

Do not apply excessive force to any of the components contained 
within this kit. Excessive force used before, during or after 
installation that results in a damaged or non-functional part will void 
all warranties. 

4.

 

Please follow the procedures in this installation manual. Improper 
installation or modification of this product will void all warranties. 

 

 

 

 

Содержание LCDM40A











Отзывы: