Advent HT3061A, Инструкция по эксплуатации

Страница: 33 / 44

Other Information
Setting The Universal Remote Control Unit
4. HOW TO SWITCH OVER TO DIFFERENT DEVICE
1. HOW TO SET THE UNIT
Notes:
1
2
3
1
2
3
1
2
3
Your Universal Remote Control is already programmed to operate your TV (just press the TV
button). You may also program the Universal Remote Control to operate other devices.
Locate the correct code for the Brand/Model of the device you wish to control from the attached
code list.
Press and hold the SET key and then press the key that corresponds to the device you wish to control
(TV, VCR, Cable/SAT, or DVD/VCD/HIFI).
Enter one of the 3-digit code for your Brand/Model from the list.
The LED indicator will blink twice.
If the correct code has been entered, all the functions of the device you wish to control should
operate. Some of the codes will control some but not all of the functions of your device. If this
occurs, repeat the above 3 steps using another 3 digit code from the code list that corresponds to
your Brand/Model.
Note: Do not exceed 5 seconds between each step.
2. HOW TO DETERMINE A 3-DIGIT CODE
Hold SET and press 1 simultaneously then release. The number of times LED indicator represents the
st
number of the 1 digit.
Hold SET and press 2 simultaneously then release. The number of times LED indicator represents the
nd
number of the 2 digit.
Hold SET and press 3 simultaneously then release. The number of times LED indicator represents the
rd
number of the 3 digit.
3. HOW TO USE “QUICK SEARCH”
If you can not locate the appropriate code for your Brand/Model, you can try “Quick Search”.
Turn the device you wish to control ON.
Locate the key, on the Universal Remote Control, for the device you want to operate (TV, VCR,
Cable/SAT, or DVD/VCD/HIFI). Press this key for 3 seconds, then release. The “Quick Search” mode is
on when the LED indicator blinks.
When the device you wish to control shuts off, immediately press the SET key and release.
If the correct code has been found, all the functions of the device you wish to control should
operate. If not, repeat the above steps 1 -3.
Your Universal Remote Control is already programmed to operate your TV (just press the TV
button). If you have programmed the Universal Remote Control to operate other devices, you must
press the key that corresponds to the device you wish to control (TV, VCR, Cable/SAT, or
DVD/VCD/HIFI).
31