5. Camera Connection:
All cameras will be connected with the green wire. It can provide 12V/3A which is sufficient to supply
power for the 3 or 4 cameras.
*NOTE: Ground for the camera power should not be connected or noise may be seen on the display.
6. Interface DIP Settings:
DIP Down= ON DIP UP= OFF
DIP
ON
OFF
Default
1
Front camera (Video1) installed
Front camera (Video1)
not
installed
DOWN(ON)
2
Left camera (Video2) installed
Left camera (Video2)
not
installed
DOWN(ON)
3
Right camera (Video3) installed
Right camera (Video3)
not
installed
DOWN(ON)
4
BSV mode
Video Mode
UP(OFF)
5
Reverse camera installed
(When R engaged aftermarket
camera (V4) shown)
OE camera is installed
(When R engaged OE camera
shown)
DOWN(ON)
6,7
No function
No function
UP(OFF)
8
7"/8" screen selected e.g. SRX
10" screen selected e.g. CT6
UP(OFF)
Connect RCA accordingly
Power
