AdvenChair Field Guide
Page 12
4.
Angle of the seatback:
The angle between the seat bucket and the seatback is adjusted by
lengthening or shortening the side strap which runs diagonally from the seatback to the
seat bucket. The buckle on the side strap has two adjustments: one to loosen the side
strap and tilt the seatback further back and the second, a ratchet mechanism, to tighten
the side strap and raise the seatback to a more upright position (Figure 9).
To tilt the seatback further back, lengthen the side strap by pulling out on the gray
portion of the buckle and sliding the strap through the buckle to make the strap longer.
To raise the seatback to a more upright position, pull the black lever portion of the lever
as many times as necessary to pull the seatback more upright.
To get the seatback adjusted evenly, adjust one side and then adjust the other side strap
to the same length.
Figure 9. Controls for positioning the seatback, armrest, and handgrips.
