R3132 Series Spectrum Analyzer Operation Manual
2.4.5 Setting the Screen Title
2-119
Setting the date display format
7.
Select Format, and set this function to LONG.
The format used to set the date is selected.
8.
Select Order and set this function to YMD.
A date display mode is set.
9.
Press Date/Time.
The Date/Time dialog box is closed.
2.4.5
Setting the Screen Title
This section describes how to enter your remarks for the screen data. A maximum of 30 characters, which
consist of alphanumeric and a few special characters, can be entered.
Setting titles
1.
Press CONFIG, Copy Config and Change Title.
The Title Entry dialog box, which is used to enter alphanumeric characters and
special characters, is displayed. This dialog box consists of the two areas: one is
the area in which characters entered are displayed, and the other is the area in
which the alphanumeric characters to be entered are displayed as buttons.(See
Figure 2-119).
Figure 2-119 Dialog Box Used to Enter Titles
2.
Select the characters you wish to enter using the data knob and step keys.
The data knob is used to move the cursor horizontally in the button area; the step
keys are used to move the cursor vertically between the rows in the button area.
In this example, enter ADVANTEST1 using upper case alphabetic characters.
3.
Move the cursor to character A, which is found on the first line, and press the
ENTER key.
Character A will be displayed in the input area within the dialog box. Note that
the cursor in this area has been shifted one place to the right.