Advantek xLite T8-S Mk2, Руководство пользователя

Страница: 8 / 31

- 8 -
www.advateklights.com PixLite T8-S Mk2 User Manual V211013
4.2 - Direct Panel Mount
1. Using the following drawing as location guide, drill four holes in your
mounting plate with a 4.5mm size drill, as shown in Figure 3 below.
Figure 3: Drilling Location Guide
2. From the bottom side of the panel, use four M4 machined thread screws to
assemble the controller to the panel, as shown in Figure 4 below. The screws
should be 8mm in length, plus the thickness of the panel.