1. Install the Device
STEP 1: Turn off your computer and remove its cover
STEP 2: Insert the PCI card to an available PCI slot firmly.
STEP 3: Secure this card to the rear of the computer chassis and put back the cover.
STEP 4: Secure the antenna to antenna connector of the card.
STEP 5: Turn on the computer.
2. Install Driver & Utility
STEP 1:
Found New Hardware Wizard
is displayed after the adapter is plugged. Please click
Cancel
to continue.
STEP 2:
Insert Installation CD into CD-ROM drive then windows below will appear. Click
Install Driver
to begin device driver installation.
STEP 3:
Please wait for a while during the Setup Wizard is preparing the setup.
STEP 4:
Please read the license agreement. Use the scroll bar to view the rest of this
agreement. Click
Yes
to accept the agreement.
STEP 5:
Please choose
Microsoft Zero Configuration Tool
or
Ralink Configuration Tool
(recommended)
to configure the adapter. Click
Next
to continue.
