4
Package Content
z
One TV Capture Card
z
One user’s quick guide
z
One CD-ROM disk includes user’s manual and device driver
z
One remote controller with battery
z
One AV and S-Video to S-Video cable
z
One Audio Line Out to sound card cable
z
One IR sensor cable
z
One RF antenna cable (if the capture card has FM connector)
Attention:
If any of above items is missing or damaged, please contact your local dealer immediately. In
order to use the TV Capture Card application utility, you have to connect all cables or devices
from the package.
Hardware Installation
This Chapter describes how to install TV Capture Card hardware and cable connection.
Hardware Installation Procedure
z
Turn off the computer.
z
Remove the system case.
z
Insert the TV Capture card into an available PCI slot.
z
Put system case back.
z
Connect all cables
z
Turn on the computer and follow the Device Driver & Application Utility installation
procedure. Please refer to the user’s manual included in the Installation CD.
Warning:
Don’t turn on your computer before all cables are plugged in. Any wrong doings
might damage the hardware
.
