Advantech WLAN-9100, Руководство пользователя

Страница: 34 / 46

-28-
To change factory default settings, type “set xxx (parameter) xxxx (value). For example,
set channel 7
command will set the channel to number 7;
set essid “Your Network”
command will set the ESSID as Your Network . Remember that, a ‘save’ command is
required for changes to take effect. Always reset your AP with the “Reset” command.
The following is a list of parameters you can make changes on the WLAN-9100.
Parameter Description Default Value
Apname A textual name for the identification of the
WLAN-9100. ApXXXXXX
(where XXXXXX is the
last six octets of Access
Point’s MAC address)
Mode The operation mode of the WLAN-9100. The
Access Points supports the following modes:
ap: Wireless LAN Access Point (AP).
sai: Station Adapter – Infrastructure (SAI)
saa: Station Adapter – Ad-hoc (SAA)
pxp: Inter-Building with Repeating (PxP) Ap
Channel The radio channel number.
1
Essid The ESS ID (a.k.a., SSID) of the Access Point.
My Network
rts_threshold The threshold (number of bytes) for enabling
RTS/CTS handshake. Data with its frame size
larger than this value will perform the RTS/CTS
handshake. Range of value: 0~2432.
2432
frag_threshold The threshold (number of bytes) for the
fragmentation boundary. Data will be transmitted
in fragments which its size does not exceed this
value. Range of value: 256~2432.
2432