2 WISE-4210-S231 Startup Manual
Open the rubber cover on the side of WISE-4210 nodes,
there is a battery switch to turn on or turn off the battery
power supply.
The module accepts 3 x AA, 3.6 V lithium battery.
The batteries should be installed facing the same direction.
Installation Procedure
Battery
1. Power on WISE-4210-S231 and WISE-4210-AP
2. Install WebAccess/SCADA in your PC.
3. To generate 75 tags use WebAccess/SCADA USB Hard
Key from the following link :
https://support.advantech.com/support/Download-
SRDetail_New.aspx?SR_ID=1-1YCRI3V&Doc_
4. Download WebAccess/SCADA WISE Starter Kit project
as in the following link :
https://support.advantech.com/support/Download-
SRDetail_New.aspx?SR_ID=1-1Y7TAWX&Doc_
5. Import WebAccess/SCADA WISE Starter Kit project into
your PC. Import procedure as following link :
https://support.advantech.com/support/Knowledge-
BaseSRDetail_New.aspx?SR_ID=1-1Y6YZXN&Doc_
6. Open WISE Starter Kit project and copy IoTDemo_
WISE-Project folder to c:\webaccess\node and c:\
webaccess\node\config
7. Open WISE Starter Kit project and open ModiconDriv-
er__UTCSwap folder. copy 3 dll file to c:\webaccess\
node and c:\webaccess\node\deriver and c:\webac-
cess\node\config\ProjectName\BIN and c:\webaccess\
node\ProjectName\BIN
8. Connect your PC with WISE-4210-AP, make sure the
PC IP segment is same with WISE-4210-AP. Default IP
on WISE-4210-AP is 192.168.1.3
9. You can have the data from WISE-4210-S231 directly
on your WebAccess/SCADA WISEPaaS Dashboard,
link as follow :
https://localhost:3000/frame/SideBar?lan
guage=en&theme=dark&orgId=3.
