Advantech UNO-3272G Series, Руководство пользователя

Страница: 24 / 64

UNO-3272G User Manual 14
2.3.1.2 Ethernet connector (LAN)
UNO-3272G is equipped with two Ethernet controllers that are fully compliant with
IEEE 802.3u 10/100/1000 Mbps CSMA/CD standards. LANA &LANB are equipped
with Intel i211. The Ethernet port provides a standard RJ45 jack connector with LED
indicators on the front side to show its Active/Link status and Speed status.
Figure 2.7 LAN Connector
Table 2.6: Ethernet Connector Pin Assignments
Pin Signal Name Description
1 MDI0+  In BASE-T: Media Dependent Interface[0]:
 1000BASE-T: In MDI configuration, MDI[0]+/-
corresponds to BI_DA+/- and in MDI-X configu-
ration MDI[0]+/- corresponds to BI_DB+/-.
 10BASE-T and 100BASE-TX: In MDI configura-
tion, MDI[0]+/- is used for the transmit pair and in
MDIX configuration MDI[0]+/- is used for the
receive pair.
2 MDI0-
3 MDI1+

In BASE-T: Media Dependent Interface[1]:
1000BASE-T: In MDI configuration, MDI[1]+/-
corresponds to BI_DB+/- and in MDI-X configu-
ration MDI[1]+/- corresponds to BI_DA+/-.
 10BASE-T and 100BASE-TX: In MDI configura-
tion, MDI[1]+/- is used for the receive pair and in
MDI-X configuration MDI[1]+/- is used for the
transmit pair.
6 MDI1-
4 MDI2+

In BASE-T: Media Dependent Interface[3:2]:
1000BASE-T: In MDI and in MDI-X configuration,
MDI[2]+/- corresponds to BI_DC+/- and MDI[3]+/
- corresponds to BI_DD+/-.
 100BASE-TX: Unused.
 10BASE-T: Unused.
5 MDI2-
7 MDI3+
8 MDI3-
Table 2.7: LED Indicators
Left LED Right LED
10 Link 100 Left 1000 Link Active
Off Orange Green Green