UNO-1150 User Manual
4
1.3 Safety Precautions
The following sections tell how to make each connection. In most cases,
you will simply need to connect a standard cable. All of the connector pin
assignments are shown in Appendix A.
Warning!!
Always disconnect the power cord from your chassis
when you are working on it. Do not connect while the
power is on. A sudden rush of power can damage sen-
sitive electronic components. Only experienced elec-
tronics personnel should open the chassis.
Caution!!
Always ground yourself to remove any static electric
charge before touching UNO-1150. Modern electronic
devices are very sensitive to static electric charges.
Use a grounding wrist strap at all times. Place all elec-
tronic components on a static-dissipative surface or in
a static-shielded bag..
1.4 UNO-1150 Series
There are three products in UNO-1150 series listed as below:
•
UNO-1150:
UNO-1150 hardware platform
•
UNO-1150F:
UNO-1150 with one external CompactFlash slot
•
UNO-1150E:
UNO-1150 with PCI-104 expansion hardware platform
